Supplied Accessories; Installation Procedure - Sony XDS-PD2000 (J) Installation Manual

1-1-2. Supplied Accessories

. Operation manual (Japanese)
. Installation manual (This manual)

1-2. Installation Procedure

Installation procedure of this unit is shown on the following fl owchart.
Refer to each section about detail of each fl ow.
The operation manual is also required to do *-marked fl ow.
Start Start
Determination of Determination of
installation place installation place
Unpacking Unpacking
Note Note
Do not reuse the packing materials. Do not reuse the packing materials.
Installation Installation
*Connection *Connection
*Initial setup *Initial setup
*Operation check *Operation check
End End
1-2 (E)
1-3. Operating Conditions 1-3. Operating Conditions
1-4. Power Supply 1-4. Power Supply
1-5. Installation Space 1-5. Installation Space
1-6. Rack Mounting 1-6. Rack Mounting
1-7. Connectors / Cables 1-7. Connectors / Cables
1-8. Signal Inputs and Outputs 1-8. Signal Inputs and Outputs
1-9. Settings after Installation 1-9. Settings after Installation
XDS-PD2000/PD1000