Sony XDS-PD2000 (J) Installation Manual page 15

Rack Mounting Procedure
Removing the feet
1. Remove the four screws, lift the unit with
both hands, and then remove the four feet
together with foot brackets.
c
Be sure to carry the unit by the two persons
or more.
m
. Put the unit on an appropriate workbench
when removing and attaching the feet.
. Do not put the unit vertically.
. Keep these screws, foot brackets and the
feet.
When operating the unit after demounting it
from the rack, be sure to reattach the foot
brackets and feet.
Tightening torque:
138 x 10
N.m {14 kgf.cm}
-2
Attaching the inner rails
2. Pull out the inner rails from the two interme-
diate rails.
3. While pressing the stopper of the inner rail in
the direction of the arrow A in the fi gure, pull
the inner rail out in the direction of the arrow
B.
XDS-PD2000/PD1000
B4 x 6 B4 x 6
Foot brackets Foot brackets
Feet Feet
Intermediate rail Intermediate rail
Inner rail Inner rail
Stopper Stopper
B B
Foot brackets Foot brackets
Feet Feet
Outer rail Outer rail
A A
B4 x 6 B4 x 6
1-7 (E)