Sony XDS-PD2000 (J) Installation Manual page 20

16. Slide the unit in and out from the rack about
three times and check that the slide rails move
smoothly.
If they are not smoothly, demount the unit
and go back to step 8 ("Attaching the outer
rails").
c
When demounting the unit, carry it by the
two persons or more.
n
This unit does not have the feet at this operat-
ing.
Put down the unit on the fl oor or other, being
careful not to damage the unit.
17. After the unit is installed in the rack, secure
the unit to the rack with four screws (RK5 x
14) and four ornamental washers.
Tightening torque:
138 x 10
N.m {14 kgf.cm}
-2
1-12 (E)
Ornamental Ornamental
washer washer
RK5 x 14 RK5 x 14
RK5 x 14 RK5 x 14
Ornamental Ornamental
washer washer
XDS-PD2000/PD1000