Suzuki 2010 SX4 Sedan Owner's Manual page 90

BEFORE DRIVING
Thermometer
The thermometer indicates the outside
temperature.
EXAMPLE
( f )
If the outside temperature nears freezing,
the mark (f) will appear on the display.
NOTE:
• The outside temperature indication is not
the actual outside temperature when
driving at low speed, or when stopped.
• If there is something wrong with the ther-
mometer, or just after the ignition switch
is turned to the "ON" position, the display
may not indicate the outside tempera-
ture.
• The mark (f) will appear whenever the
outside temperature is near freezing,
even if the display does not show the
thermometer.
To change the unit of temperature, while
pushing and holding the trip meter selector
knob (1), turn the indicator selector knob
(2).
2-73
EXAMPLE
80J2030
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the unit of temperature
will be reinitialized. Change the unit again
to your preference.
Transaxle selector position indicator
(for CVT)
EXAMPLE
(Initial
setting)
When the ignition switch is in the "ON"
position, the display (C) indicates the gear
position (g).
When using the manual mode, the display
(C) indicates the manual mode indicator
80J2031
(h).
For details on how to use the transaxle,
refer to "Using the Transaxle" in the
"OPERATING YOUR VEHICLE" section.
(h) (g)
80J2032
80J23-03E