Suzuki 2010 SX4 Sedan Owner's Manual page 84

BEFORE DRIVING
Illumination Indicator Light
This indicator light comes on while the
position lights, tail light and/or the head-
lights are on.
Turn Signal Indicators
When you turn on the left or right turn sig-
nals, the corresponding green arrow on the
instrument panel will flash along with the
respective turn signal lights.
When you turn on the hazard warning
switch, both arrows will flash along with all
of the turn signal lights.
2-67
High Beam Indicator Light
64J045
This indicator comes on when headlight
high beams are turned on.
intelligent All Wheel Drive (i-AWD)
AUTO Indicator Light (if equipped)
50G055
When the ignition switch is turned to the
"ON" position, the light comes on briefly so
you can check that the light is working.
When the 2WD/i-AWD switch is in the "i-
AWD AUTO" mode with the ignition switch
in the "ON" position, the light comes on
and stays on.
If the light and the "i-AWD LOCK" indicator
light stay on or come on simultaneously
when driving, there may be something
wrong with the i-AWD system. Have the
system inspected by
SUZUKI dealer.
If the oil temperature of the parts for i-AWD
system is high, this light will blink. The "i-
AWD AUTO" or "i-AWD LOCK" mode will
be changed to the "2WD" mode automati-
cally to prevent a damage of the parts for i-
AWD system.
50G056
NOTE:
If you restart the engine, the light will stop
blinking temporarily.
For details, refer to "Using the 2WD/i-AWD
Switch" in the "OPERATING YOUR VEHI-
CLE" section.
NOTE:
When the vehicle speed is increased, the
"i-AWD LOCK" mode will be changed to
the "i-AWD AUTO" mode automatically.
The "i-AWD AUTO" indicator light will come
79J040
on and stay on.
an authorized
80J23-03E