Suzuki 2010 SX4 Sedan Owner's Manual page 231

D. Construction Code
This letter code is used to indicate
the type of ply construction in the
tire. The letter "R" means radial
ply tire construction, the letter "D"
means diagonal or bias ply con-
struction, and the letter "B" means
belted-bias ply construction.
E. Rim Diameter
This two-digit number is the wheel
or rim diameter in inches.
WARNING
Your SUZUKI is equipped with
tires which are all the same type
and size. This is important to
ensure proper steering and han-
dling of the vehicle. Never mix
tires of different size or type on
the four wheels of your vehicle.
Mixing tires could cause you to
lose control while driving which
may lead to an accident. The size
and type of tires used should be
only those approved by SUZUKI
Motor Corporation as standard or
optional equipment for your vehi-
cle.
Tire Inflation Pressure
Tire inflation pressure should be
checked when the tire is cold. "Cold
tire inflation pressure" is the pressure
in a tire that has been driven less than
1 mile (1.6 km) or has been standing
for three hours or more.
The front and rear tire pressure speci-
fications for your vehicle are shown
below and are listed on the Tire and
Loading Information Label, which is
located on the driver's door lock pillar.
The Tire and Loading Information
Label contains the following informa-
tion:
INSPECTION AND MAINTENANCE
• Seating Capacity
• Maximum Allowed
Weight of Occupants and Cargo
• Original Tire Size
• Recommended Cold Tire Inflation
Pressure of Original Tires
• Size of Compact Spare Tire
• Recommended Cold Tire Inflation
Pressure of Compact Spare Tire
Recommended Cold Tire Inflation
Pressures
Front Tires
Rear Tires
Compact Spare Tire
80JS025
Combined
230 kPa
33 psi
230 kPa
33 psi
420 kPa
60 psi
7-26
80J23-03E