Pedals - Suzuki 2010 SX4 Sedan Owner's Manual

Cruise Control: 7, 8
OPERATING YOUR VEHICLE
For CVT vehicles, always set the parking
brake before moving the gearshift lever to
the "P" (Park) position. If you park on an
incline and shift into "P" before you set the
parking brake, the weight of the vehicle
may make it difficult to shift out of "P" when
you are ready to drive the vehicle. When
preparing to drive the vehicle, move the
gearshift lever out of the "P" position before
releasing the parking brake.
WARNING
• Never drive your vehicle with the
parking brake set: rear brake effec-
tiveness can be reduced from over-
heating, brake life
shortened or permanent
damage may result.
• If the parking brake does not hold
the vehicle securely or does not
fully release, have your vehicle
inspected immediately by an autho-
rized SUZUKI dealer.
3-7
WARNING
Always set the parking brake fully
before leaving your vehicle or it may
roll, causing injury or damage. When
parking, make sure the gearshift
lever for manual transaxle vehicles is
in 1st gear or "R" (Reverse) and the
gearshift lever for CVT vehicles is in
"P" (Park). Remember, even though
the transaxle is in gear or in Park, you
must set the parking brake fully.
may be
brake

Pedals

Manual transaxle
EXAMPLE
(1) (2)
CVT
EXAMPLE
(2) (3)
80J23-03E
(3)
79J072
79J154