Jacking Instructions - Suzuki 2010 SX4 Sedan Owner's Manual

Suzuki 2010 sx4 automobile owner's manual
Table of Contents

Advertisement

Trailer Towing: 5, 11, 13
Towing Your Vehicle (recreational towing): 13
WARNING
The jack should be used only to
change wheels. It is important to read
the jacking instructions in this sec-
tion before attempting to use the
jack.
WARNING
After using the jack, jack handle and
wheel wrench, be sure to stow them
securely or they can cause injury if
an accident occurs.

Jacking Instructions

1) Place the vehicle on level, hard ground.
2) Set the parking brake firmly and shift
into "P" (Park) if your vehicle has a CVT,
or shift into "R" (Reverse) if your vehicle
has a manual transaxle.
WARNING
• Be sure to shift into "P" (Park) for a
CVT vehicle, or into "R" (Reverse)
for a manual transaxle vehicle
when you jack up the vehicle.
• Never jack up the vehicle with the
transaxle in "N" (Neutral). Other-
wise, an unstable jack may cause
an accident.
3) Turn on the hazard warning flasher if
your vehicle is near traffic.
EMERGENCY SERVICE
4) Block the front and rear of the wheel
diagonally opposite of the wheel being
lifted.
5) Place the spare wheel near the wheel
being lifted as shown in the illustration
in case that the jack slips.
75F062
54G253
8-2
80J23-03E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents