Suzuki 2010 SX4 Sedan Owner's Manual page 59

EXAMPLE
4) Return the seatback to the normal,
upright position. Tighten the lower
straps as described in the child restraint
owner's manual. Attach the top tether
strap, if applicable.
EXAMPLE
65D341
5) Make sure the child restraint is securely
fastened by trying to move the child
restraint system in all directions, espe-
cially forward.
WARNING
The seatback should always be
securely latched in a fairly upright
position when any type of child seat
is installed. An unlatched or reclined
seatback will reduce the intended
effectiveness of the child restraint
system.
BEFORE DRIVING
If your LATCH restraint has rigid lower con-
necting bars, these general instructions
apply:
1) If possible, fold the seatback rearward
for easier installation.
EXAMPLE
65D342
2) Place the child restraint in the rear seat,
inserting the connecting bars through
the slots in the seat cushion or the slots
in the seatback bottom.
78F114
2-42
80J23-03E