Suzuki 2010 SX4 Sedan Owner's Manual page 180

OTHER CONTROLS AND EQUIPMENT
Setting the Anti-Theft Function
1) Turn off the power by pressing the
power on/off knob (1).
2) Press the power on/off knob (1) while
pressing and holding the track up but-
ton (2). The "ENTRY 0000" will blink
and the audio system enter PIN-input
mode.
NOTE:
Establish your PIN by combining numbers
from 1 to 6 into any 4-digit number. If you
forget your PIN, when you remove the bat-
tery for repair etc., you will no longer be
able to operate the audio system.
EXAMPLE
3) Input the four digit PIN using preset but-
tons 1 to 6.
5-39
4) After you enter your four digit PIN, the
display will return to "0000".
66J118
EXAMPLE
5) Input the same 4-digit number you pre-
viously entered.
6) The power of the audio system will turn
off.
66J117
NOTE:
Write down your PIN for the future use.
Canceling Your Established PIN
Setting
This operation is to be done when you
want to cancel the anti-theft function or
change your PIN.
1) Turn off the power by pressing the
power on/off knob (1).
66J118
2) Press the power on/off knob (1) while
pressing and holding the track up but-
66J117
ton (2). The "DELETE 0000" will blink
and the audio system will enter the can-
cel mode.
66J120
66J121
80J23-03E