(3)
(4)
(3)
3) Pushing the unguiform prongs (3)
toward inside and remove the bulb
holder (4).
4) Replace the bulbs.
To install a high-mounted stop light
housing in the reverse order of removal.
SX4 SEDAN
80JM076
(1)
To remove the high-mounted stop light
housing, pinch both side of the clip (1) and
push it in.
INSPECTION AND MAINTENANCE
Wiper Blades
If the wiper blades become brittle or dam-
aged, or make streaks when wiping,
replace the wiper blades.
To install new wiper blades, follow the pro-
cedures below.
CAUTION
To avoid scratching or breaking the
window, do not let the wiper arm
80JM132
strike the window while replacing the
wiper blade.
NOTE:
Some wiper blades may be different from
the ones described here depending on
vehicle specifications. If so, consult your
SUZUKI dealer for proper replacement
method.
80G083
7-46
80J23-03E