Sony HDCU1000 Installation Manual page 85

Page Menu / Menu Image
18 Slot 4 Board Diag
*EN-A(Slot4) Diag* 15/20
Front Power:OK
PLD Version:1.00 Done
Mode :Normal
Rear:VDA-A Power:OK
19 Slot 5 Board Diag
*EN-B(Slot5) Diag* 16/20
Sub-Ref:None
Unknown
Front Power:OK
PLD Version:1.00 Done
Mode :Normal
Rear:VDA-B Power:OK
20 Slot 6 Board Diag
*Slot-6 Diag*
Front None
Rear :VDA-C
21 SDP Board Diag
*SDP Diag*
PLD Status
RX-PLD Version:1.00
TX-PLD Version:1.00
Config Done :Done
SDP Mode :Normal
Power :OK
22 Camera Diag
*CAMERA Diag*
ALL BOARD OK
23 ROM Version
*ROM Version*
CHU HDC1000
1.10 06.09.15
CCU HDCU1000
1.10 06.09.15
R-PNL CNU-700
3.40c15 05.07.15
. IM/HDCU1000 Series
Item
POWER
PLD
MODE
Rear
POWER
Sub-Ref
POWER
PLD
MODE
Rear
POWER
POWER
17/20
PLD
MODE
Rear
POWER
PLD Version
18/20
Mode
Power
(Camera Board
19/20
Diag Display)
CHU Version
20/20
CCU Version
R-PNL Version
F-PNL Version
Description
HDCU1000/1080 only
Displays the status of the board attached to the optional board
for Slot 4 (front/rear).
The display content varies depending on the board installed in
the optional slot.
HDCU1000/1080 only
Displays the status of the board attached to the optional board
for Slot 5 (front/rear).
The display content varies depending on the board installed in
the optional slot.
HDCU1000 only
Displays the status of the board attached to the optional board
for Slot 6 (front/rear).
The display content varies depending on the board installed in
the optional slot.
Displays the PLD Version and the status of the SDP board.
Displays the results of the automatic diagnostics for each board
of the camera.
"ALL BOARD OK" is displayed if there are no abnormalities in
the automatic diagnostics.
ROM version information for the connected camera.
ROM version information for the main unit.
Information about the equipment connected to the rear panel
port (RCP/CNU).
Information about the equipment connected to the front panel
port.
3-11 (E)