Sony HDCU1000 Installation Manual page 26

Ref.No. Name
S32 U-TALLY
(POWER/TTL)
S500 MIC1 LEV
S501 MIC2 LEV
S502 PGM1 IN
S503 PGM2 IN
S602 PROD SEL
S600 PROD SEL2
S603 ENG SEL
S601 ENG SEL2
RV500 MIC1 LEV
RV501 MIC2 LEV
RV600 PROD 2WIRE CANCEL
RV601 ENG 2WIRE CANCEL
1-20 (E)
Function
Not used
Tally system setting
U tally
Switch S31
Signal standard POWER/
CONTACT
Contact supply CONTACT
24 V power supply POWER
5 V power supply POWER
Sets the output level of MIC.
0dB : When the input level on the system is 0 dBu.
_20dB: When the input level on the system is _20 dBu.
Sets the output level of MIC.
0dB : When the input level on the system is 0 dBu.
_20dB: When the input level on the system is _20 dBu.
Sets the input level of the system PGM (analog).
0dB : When the input level of the system is 0 dBu.
_20dB: When the input level of the system is _20 dBu.
Sets the input level of the system PGM (analog).
0dB : When the input level of the system is 0 dBu.
_20dB: When the input level of the system is _20 dBu.
Selects the intercom system of the producer line.
S602 S600
*
4-Wire 4W
RTS RTS RTS
Clear-Com RTS CC
* When 4-Wire is selected, S600 can be set to RTS or CC.
Selects the intercom system of the engineer line.
S603 S601
4-Wire 4W *
RTS RTS RTS
Clear-Com RTS CC
* When 4-Wire is selected, S601 can be set to RTS or CC.
S32
POWER/TTL
_
POWER
TTL
Factory default setting
TTL
0 dB
0 dB
0 dB
0 dB
4W
RTS
4W
RTS
. IM/HDCU1000 Series