Sony HDCU1000 Installation Manual page 28

Ref.No. Name
S4 MONI
RV1 MONI LEV
SDP-12 board
5 4 3 2 1
S402
S401
SDP-12 (Side A)
Ref.No. Name
S401 1-8 Factory Use Only
S402 Factory Use Only
1-22 (E)
Function
Sets the signal output to the character monitor (SD analog) output.
The character signal from each DRX board is connected directly to the
character monitor output, so only one character signal must be turned on,
and the character signals from the rest of the DRX boards must be turned off.
Set only the first DRX board to ON, and the rest of the DRX boards to OFF.
* : Set only the first board to ON, and the rest to OFF.
Adjusts the output level of the character monitor signal.
Function
_
_
Factory default setting
*
Factory default setting
OFF (ALL)
OFF
. IM/HDCU1000 Series