When Software V1.10 Or Later Version Is Used With The System Connection Mode Via Ethernet Set - Sony HDCU1000 Installation Manual

3-2-2. When software V1.10 or later version is used with the system connection mode via
Ethernet set
Sets the switch S407 (TEST-SW5) on the AT-167 board to ON
Page Menu / Menu Image
1 VF Display
0dB 1/125
ND:1 F:2.7 x1
2 Camera Status
0dB 1/125
White
R: 0
G: 0
B: 0
BLK γ
: 0
DTL
: 0
ND:1 F:2.7 x1
3 SD Signal Status
0 H:A V:A γ : 0
EC
SD Matrix: ON
CC Reduce: ON
Coring: 0 Level : 35
SD Detail: ON
Level : 0 Comb : 0
Limit : 0 Lim-w : 0
Crisp : 0 Lim-b : 0
LDKnee: 0 LDGain: 0
Ratio : 0
Freq : 0
4 System Status
*System Status*
HDC1500 720/59.94P
Ref:Free Lock
HD Main:720/59.94P
HD Conv:-------------
SD Conv:525/59.94I
Return Setting
1:720/59.94P
2:525/59.94I(PsF)
3:720/59.94P
4:720/59.94P
5 Diagnosis
** Diagnosis **
A:AT :OK 2:DRX2 OK
B:AVP :OK 3:DRX3 OK
C: 4:EN-A OK
D:DTX :OK 5:EN2-B:OK
1:DRX :OK 6:
3-8 (E)
Item
MASTER GAIN
OFF
EVS ON/OFF
SHUTTER SETTING
SHUTTER ON/OFF
ND FILTER
IRIS
EXTENDER
CC FILTER
CC:B
White R/G/B
OFF
Black R/G/B
Black
BLK γ
R: 0
G: 0
DTL
B: 0
Flare R/G/B
M: 0
Flare
R: 0
G: 0
B: 0
CC:B
SD MATRIX
CC Reduce
SD Detail
CHU Model Name
1/20
Format
Ref Condition
HD/SD out Format
Return Setting
HDCU1000
Slot A to D
Slot 1 to 6
HDCU1080
Slot A to E
Slot 1 to 5
HDCU1500
Slot A to C
Slot 1 to 3
Description
Displays the camera SW status on the viewfinder of the
connected camera.
Displays the white balance, black balance, gamma, DTL, and
flare status for the camera in addition to the information
displayed above for VF Display.
Displays the SD signal status for CCU.
Displays the model name and format settings for the connected
camera, the output format settings from the CCU, the external
synchronization settings, and the Return signal format status.
Displays the names of the boards inserted into the front card slot
and the results of the automatic diagnostics for those boards.
. IM/HDCU1000 Series