Advertisement
System Connection Example
Control
terminal
Computer
Primary
station
Level 1
DVS-V6464B Video
Routing Switcher (M)
Video
Secondary
station
Source
VTR
max.
128
units
Only one of the REMOTE 1 connectors on a routing switcher used as a secondary station will be active.
1) Communication software or Windows 3.1 should be installed in the computer. If Windows 95/NT using terminal mode is installed, the
function buttons do not function.
2) (M): The M/S select switch on the CPU board of the routing switcher is set to M.
3) (S): The M/S select switch on the CPU board of the routing switcher is set to S.
4) Connect 75-ohm terminators to the T-bridge connected to the last unit of the S-BUS data link and to the unused REMOTE 1 connectors.
1)
2)
Level 1
Level 1
DVS-V3232B
DVS-A3232 Audio
Video Routing
Routing Switcher
Switcher (S)
2)
(S)
3)
Video
Audio
Level 1
BKS-R3210
BKS-R3209
BKS-R3209
BKS-R3209
Example for basic configuration of the S-BUS data link
Video
Destination VTR
Video
Audio
Time code
Level 1
Level 1
DVS-A3232 Audio
Routing Switcher
Routing switcher
(S)
3)
Time code
Level 1
BKS-R3210
BKS-R3209
BKS-R3209
BKS-R3209
S-BUS line
Signal
RS-232C
T Bridge (A)
T bridge (B)
75-ohm terminator
4)
Matrix level
BKS-R3209
BKS-R3209
BKS-R3209
BKS-R3209
5 (E)
Advertisement
Chapters
