④
"IP address"
If a link is available, you can use it to access the Web server of the configured device you
selected.
⑤
"Details"
Additional information about the selected module is provided in the "Status" and
"Identification" tabs via the "Details" link.
⑥
"Status" tab
The tab contains information about the status of the selected module when a fault or alarm
exists.
⑦
"Identification" tab
The tab contains data on the identification of the selected module.
Note
This tab displays only the data configured offline of the module.
Web server
Function Manual, 11/2019, A5E03484625-AG
Web pages
3.5 Module information
59