Server Hardware - Siemens Unix V4.0 Overviews & Installation Instructions

Introduction to Advanced Server for UNIX
i
2.7.2 Role of the server
You can install Advanced Server for UNIX and LAN Manager/X in a domain with Windows
NT servers. Only one Advanced Server for UNIX or Windows NT server can be installed as
a primary domain controller in a single domain. LAN Manager/X servers cannot take on the
server role of primary domain controller.
i

2.7.3 Server hardware

Advanced Server for UNIX can be operated via any network with TCP/IP capability, e.g. via
Ethernet
Product Manual
The RFC 1001/2 implementation (NetBIOS™ on TCP/IP) is the basis for
communication with the server system.
The MS LAN Manager OS/2 products referred to above are only available for
OS/2 V1.x.
If you are using the client with MS LAN Manager V2.0, you must set up the
TCP/IP communication software with the Siemens product LAN1 Vx.
The product MS LAN Manager provides TCP/IP with Version 2.1 and later; with
this product you have the option (e.g. if you want to implement an emulation in
parallel) of incorporating the product LAN1 Vx.
The product LAN1 is not supplied with Advanced Server for UNIX.
The commands referred to, i.e. udir, uren, and uchmod, cannot be used on all
clients. In this case you should use the corresponding UNIX commands.
The server roles of member server and standalone server have been omitted from
Advanced Server for UNIX.
®
or Token Ring™.
Compatibility
U7613-J-Z815-6-76