Siemens SIMATIC S7-1500 Function Manual page 97

Web pages
3.13 Record
Trace recordings
The "Trace recordings" area shows a list of all existing measurements, sorted by date and
time of the trace recordings. A measurement always consists of a trace configuration with an
associated recording.
The following table shows the special Web server shortcut menu commands in the Trace
recordings area:
Table 3- 7 Web server shortcut menu commands in the trace recordings area
Shortcut menu command
"Delete"
"Save as"
"Show in chart"
"Add in table"
Some data types offer the display of individual bit tracks. Enable the individual bit tracks of
the signal opened in the signal table using the
You can adjust the display of the signals in the signal table and with the toolbar of the curve
diagram.
Figure 3-54 Trace measurement - All areas visible
96
Description
Deletes the selected measurement on the memory card of the CPU. A confirmation
dialog opens.
After deletion, the display in the trend diagram is not automatically overwritten.
Saves the selected measurement.
Loads the selected measurement to the display area of the Web server.
Inserts the selected measurement into the table in the "Measurements" tab.
icon.
Function Manual, 11/2019, A5E03484625-AG
Web server