Siemens SIMATIC S7-400 Hardware And Installation Manual page 6

Preface
Additional Manuals Required for M7-400
This documentation package describes the hardware of the M7-400. You will need
the following additional documentation for programming and starting up an M7-400:
Documentation
SIMATIC M7 Technical
Overview
System Software for
M7-300/400 Program Design
Programming Manual
System Software for
M7-300/400 System and
Standard Functions Reference
Manual
System Software for
M7-300/400 Installation and
Operation User Manual
Further Information
For further information on S7-400 and memory programmable controllers, see the
list in the Appendix.
CD-ROM
Additionally, complete SIMATIC S7 documentation is available on CD-ROM.
Structure of this Manual
To facilitate rapid access to special information, the manual contains the following
aids:
At the start of the manual, you will find a complete list of contents.
The appendix is followed by a glossary which defines the important technical
terms used in the manual.
At the end of the manual there is a detailed index to enable you to find the
desired information quickly.
vi
www.gkbpx.com
Contents
Describes the available components,
possible structures and principles of
communication
Designing, writing and testing a C program
for M7 CPU/FM modules with the M7 SYS
programming package, using the M7 SYS
functions
Detailed description of the M7 SYS functions
and data structures, listing of messages
types
Installing and configuring the operating
system and system software
S7-400 and M7-400 Programmable Controllers, Installation Manual
Order No.
6ES7 498-0AA00-8AA0
6ES7 802-0FA01-0AA0
C79000-G7076-C424-01