Vision Fitness R60 Owner's Manual page 28

PROBLEM: The seat on your
semi--recumbent Bike rocks from
side to side.
SOLUTION: With a 13mm wrench,
loosen the Fixing Nuts on the side
of the seat frame. With an 11mm
wrench, pivot the Adjusting Post so
the Fixing Nut is at the top of the
slot. Tighten the Fixing Nut with the
13mm wrench.
NOTE:
If the above steps fail to remedy the problem, discontinue use, turn
the power off and contact your retailer.
OBTAINING SERVICE
Do not attempt to service this Bike yourself except for the maintenance
tasks described in this manual. For information on service to your
VISION FITNESS Bike, contact the local retailer from whom you purchased
the Bike. To expedite service, please make sure to have your serial number
available. The serial number is found on a label located on the front
support tube of your Bike.
SERIAL NUMBER:______________________
24