Preparation; Unpacking; Transporting And Lifting; Transporting - Samson TROVIS 5724-8 Mounting And Operating Instructions

Preparation

4 Preparation
After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Compare
the shipment received against the deliv-
ery note.
2. Check the shipment for transportation
damage. Report any damage to SAM-
SON and the forwarding agent (refer to
delivery note).

4.1 Unpacking

Note
Do not remove the packaging until immedi-
ately before mounting and start-up.
1. Remove the packaging from the electric
actuator.
2. Dispose of the packaging in accordance
with the valid regulations.

4.2 Transporting and lifting

4.2.1

Transporting

− Protect the electric actuator against exter-
nal influences (e.g. impact).
− Protect the electric actuator against mois-
ture and dirt.
− Observe the permissible transportation
temperature of –20 to +70 °C.
20
4.2.2

Lifting

Due to the low service weight, lifting equip-
ment is not required to lift the electric actua-
tor.

4.3 Storage

NOTICE
!
Risk of actuator damage due to improper
storage.
− Observe storage instructions.
− Avoid long storage times.
− Contact SAMSON in case of different stor-
age conditions or longer storage times.
Note
We recommend regularly checking the elec-
tric actuator and the prevailing storage con-
ditions during long storage periods.
Storage instructions
− Protect the electric actuator against exter-
nal influences (e.g. impact).
− Protect the electric actuator against mois-
ture and dirt.
− Make sure that the ambient air is free of
acids or other corrosive media.
− Observe the permissible storage tem-
perature from –20 to +70 °C.
− Do not place any objects on the electric
actuator.
EB 5724-8 EN