Denso BHT-1400-CE Series Hardware User Manual page 9

Handling the battery
Failure to follow all instructions listed below may cause electrical shock, overheating, smoking, fire, or an explosion.
• If smoke, abnormal odor, noises, or anything unusual is noticed, stop using the battery immediately.
•Do not put the battery into a microwave oven or high-pressure container.
• Stop charging if the charge does not complete after the specified time has elapsed.
Handling the BHT
Failure to follow all instructions listed below may cause not only incorrect operation, but also overheating, smoking
and malfunction.
• When using the hand belt, avoid getting it caught in other objects or entangled it in rotating machinery.
• Stop charging if the charge does not complete after the specified time has elapsed.
BHT near wireless devices such as personal radios and ham radios.
• Do not place magnetic cards such as cash cards, credit cards, etc., close to the BHT speaker.
Failure to follow instruction may result in the loss of magnetic data.
• Do not place your ear close to the speaker when sounds are emitted.
Failure to follow instruction may result in hearing loss.
• Do not use excessive force when inserting or removing the rechargeable battery.
• Do not use the BHT in environments where static electricity can build into significant charges.
• Do not drop the BHT on the floor or subject it to strong impact.
• Do not use anything other than the stylus pen that comes with this product to avoid scratching or
breaking the screen.
• Do not touch the BHT with greasy hands or gloves.
• Make sure that both the BHT and battery are dry before placing the BHT into the cradle Failure to follow
instruction may result in a fire or electrical shock
•This product is equipped with the connector for a microSD card. Do not insert anything other than a
microSD card. Do not use excessive strength when inserting the microSD card Insert the microSD card
straight into the slot with the metal contacts facing up and going in first. Failure to follow instruction may
damage the microSD card and connector.
•Plugging in the BHT into the CU: Slide the BHT gently into the CU. Make sure that it is placed along the
guides and not tilted or twisted. If the BHT does not easily fit into the CU, please take it out, check the CU
and the BHT for interfering obstacles and try again. Never use any force to attach the BHT into the CU.
Barcode/2D Code Handy Terminal
Do not us e the
viii