Denso BHT-1400-CE Series Hardware User Manual page 8

BHT-1400-CE Series
To System Designers
In a life-critical system such as a medicines management system, even a simple data error may cause a
potential life-threatening situation. Always provide a redundant design and fail-safe system to protect
human lives.
Handling the BHT
Failure to follow all instructions listed below may cause electrical shock, overheating and smoking.
• Do not disassemble or modify the BHT.
• Do not insert foreign objects in the BHT.
• Do not wet the BHT with any liquid.
• Do not put the BHT into a microwave oven or high-pressure container.
• Do not leave the BHT in places where there are excessively high temperatures, such as inside
closed-up automobiles or in places exposed to direct sunlight.
• Do not use the BHT in dusty or humid environments or places where a sharp temperature change is
expected.
• Do not use the BHT if the case is damaged.
• Do not use the power supply other than the battery specified by DENSO WAVE.
• If the liquid leaks out from the broken LCD, do not swallow, inhale or touch it.
• Do not poke anyone's eyes with the stylus that comes with the BHT.
• Do not stare into the laser light.
• Do not point the code reading window at anyone's eyes.
• If smoke, abnormal odor, noises, or anything unusual is noticed, immediately turn the BHT off and
remove the battery from the BHT.
• If the battery fluid leaks out from the battery and gets into your eyes, or comes into contact with the skin,
wash thoroughly with clean water such as tap water without rubbing, and seek medical attention
immediately. Failure to follow instruction may result in eye or skin injuries.
• Do not touch the broken LCD if it is cracked or broken, as this may cause bodily injury.
vii