Denso BHT-1400-CE Series Hardware User Manual page 22

Charging with the communication unit (CU-AU1-14)
1.
Slide the battery cover lock (1) in
the direction shown by the arrow
and remove the battery cover (2).
2.
Insert the battery in the direction shown by the
arrow, matching the positive and negative
markings on the battery with the markings in the
battery compartment.
Use only the dedicated battery.
− Caution −
Do not touch any metal parts inside the
BHT to prevent a malfunction caused
by static electricity discharging when
inserting or removing the battery.
3.
Insert the catch tab into the fit
position (1) then replace the
cover (2), and then slide shut
the cover lock (3).
Barcode / 2D Code Handy Terminal
①
③
②
①
②
11