Denso BHT-1400-CE Series Hardware User Manual page 25

BHT-1400-CE Series
Failure to follow all instructions listed below may result in charger overheating, smoking,
explosion or fire.
● Never disassemble or modify the battery.
● Never connect the battery terminals with a metal object such as wire.
● Never carry or store the battery together with metal object such as necklaces or hairpins.
● Never expose the battery to fire or heat.
● Never use or leave the battery near high-temperature locations (60°C or higher) such as a
● Never put or wet the battery with any liquid.
DANGER
● Never charge the battery near a fire or in direct sunlight.
● Never hammer nails into the battery, hit it with a hammer, or step on it.
● Never subject the battery to strong impact or throw it.
● Never use a damaged or deformed battery.
● Never solder directly to the battery.
● If battery fluid leaks out from the battery and gets into your eyes or comes into contact with
Failure to follow instruction below may result in charger overheating, smoking, blowup or
combustion.
CAUTION
● Stop charging if the charge does not complete after the specified time has elapsed.
• The BHT is equipped with a backup battery to back up the internal memory and calendar clock in
- Note -
case the battery is removed or the battery voltage falls below the stipulated level. It is therefore
necessary to charge the internal backup battery when using the BHT for the first time or after long
unused periods. The backup battery is charged automatically when a fully-charged battery is
inserted. To ensure that the backup battery is fully charged, do not remove the battery for at least
2 days when using the BHT for the first time or after unused long periods.
If the BHT is left for a long period of time with the battery removed, all data in settings
•
stored in the RAM will be lost and the RAM will revert to the factory default. Any
important data should be backed up to the "FLASH" folder or to the computer The BHT
starts from the "Initial Setup" when the BHT turns ON after the data in the RAM is
deleted.
• Refer to "5.3 Using the BHT after Long Periods" for the details of handling the BHT after long
periods.
• Avoid storing the battery in high-temperature locations. The battery capacity may decrease.
• Do not touch the BHT, battery, or charger terminals by hand or stain them.
Failure to follow instruction may result in a BHT malfunction or battery charging failure.
It is recommended that any dirt on the battery terminals or BHT battery terminals be regularly
wiped off with a soft, dry cloth.
14
fire or heater.
the skin, wash thoroughly with clean water such as tap water without rubbing, and seek
medical attention immediately. Failure to follow instruction may result in eye or skin injuries.