Skoda Octavia III 2013 Workshop Manual page 25

– Screw out screws -arrows- on gearbox mount by approxi‐
mately 2 turns.
– Screw out screws -arrows- on engine mount by approximately
2 turns.
– Loosen hose clamp -arrow- and remove air guide hose -1-
from the charge air cooler left.
– Loosen hose clamp -2- and remove air guide hose from the
charge air cooler right.
Note
Do not pay attention to the position -1-.
– Close the open lines and connections, immediately with a
clean plug, from the plug set for engine , e.g. -VAS 6122- .
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
2. Removing and installing engine
17