Specifications - Panasonic AW-RP655N Operating Instructions Manual

Specifications

Power supply: DC 10.8 V to DC 16 V
Power consumption: 9.0 W
1 indicates safety information.
$ General
Ambient operating temperature
14°F to 122°F (–10°C to +50°C)
Storage temperature
–4°F to +140°F (–20°C to +60°C)
Ambient operating humidity
30% to 90% (no condensation)
Weight
7.48 lbs. (3.4 kg)
Dimensions (W!H!D)
16-9/16"!2-1/16"!8-11/16" (420!52!220 mm)
Pan/tilt heads supported
AW-PH300, AW-PH300A, AW-PH350, AW-PH360,
AW-PH500, AW-PH600, AW-PH650
Cameras supported
AW-E300, AW-E300A, AW-E600, AW-E800, AW-E800A,
AW-E350, AW-E650, AW-E655, AW-E750, AW-E860
$ Input connectors
DC 12V IN socket
XLR, 4 pins
TO CONTROL PANEL [IN/OUT] connectors
RJ45 (1 each)
Connecting cable:
10BASE-T straight cables (UTP category 5),
max. 3,280 feet (1,000 meters)
When more than one control panel is to be connected to
the main unit, make sure that the total length of all the
cables does not exceed 3,280 feet (1,000 meters).
INCOM/TALLY
D-SUB, 15-pin
REMOTE/SERVICE
RS-232C
$ Output connectors
CONTROL OUT TO PAN/TILT HEAD [1/EXT2 to 5]
connectors
RJ45 a5, control signal output for pan/tilt heads
Connecting cable:
10BASE-T straight cables (UTP category 5),
max. 3,280 feet (1,000 meters)
MONITOR SELECT connector
RJ45
Connecting cable:
10BASE-T straight cables (UTP category 5),
max. 164 feet (50 meters)
$ Other
TERMINATION switch
Termination setting for communication line with control
panel
ID switch
Operations mode (MAIN, 1, 2) setting.
REMOTE/SERVICE switch
Maintenance switch. Set in the N position during use.
$ Input/Output connectors
• TO CONTROL PANEL
• INCOM/TALLY
• REMOTE/SERVICE
• CONTROL OUT TO PAN/TILT HEAD
41