Panasonic AW-RP655N Operating Instructions Manual page 24

Operation
Subcarrier phase adjustment
The subcarrier phase adjustment must be performed, when
composite signals have been set as the video input signals
and the pictures are to be switched by a video switcher or
other equipments.
This adjustment is not necessary when component signals
have been set as the video input signals.
1. Select the pan/tilt head system using the
CONTROL/PREVIEW MONITOR OUT SEL button.
2. Connect the video switcher to the video signal
corresponding to the currently selected pan/tilt head
system (when using the cable compensation unit, the
corresponding Y/VIDEO OUT terminal) and the color
monitor to the video switcher's video output terminal.
3. Press the MODE button to establish the BAR mode and
switch the output signals from the convertible camera to
color bar signals.
4. Press the MENU button, turn the menu setting control
(main), and set it so that the G/L SETTING item appears
at the top of the LCD panel.
G G / / L L S S E E T T T T I I N N G G
5. Press the OK button.
The following item appears on the LCD panel.
H H P P H H A A S S E E
6. Turn the menu setting control (main), and set it so that
the following item appears on the LCD panel.
S S C C P P H H A A S S E E
C C O O A A R R S S E E : : 1 1
7. Output both the color bar signals (signals from inside the
switcher or other equipments) serving as the reference
and the color bar signals from the camera to the color
monitor.
O O K K K K e e y y
n
± ± 0 0
F F I I N N E E : : ± ± 0 0
8. Align the phase of the color bar signals from the camera
with the phase of the color bar signals serving as the
reference.
Use the menu setting control (L) to adjust the phase in
90-degree increments and then the menu setting control
(R) to make fine adjustments.
9. Select the next pan/tilt head system using the
CONTROL/PREVIEW MONITOR OUT SEL button, and
continue adjusting the subcarrier phase in each system
concerned.
24
Color bar signals from
the camera
Partition line
Color bar signals from
the switcher or other
equipments