Panasonic AW-RP655N Operating Instructions Manual page 11

Parts and their functions
_ TALLY lamps [1] to [5]
When tally signals are input to TALLY connectors [1]
through [5] on the main unit, the lamps with the numbers
corresponding to the connectors come on.
` CONTROL/PREVIEW MONITOR OUT SEL
buttons [1] to [5], [AUX]
Pressing buttons 1 to 5 will select the connected pan/tilt
head system.
When the AW-RC400 is connected, the button of the
chosen number will illuminate and the video signal from
the selected pan/tilt head system will be output to the
AW-RC400's MONITOR OUT 1 to 2 terminals.
The AUX switch will not function in a system made with
the AW-RC400.
a PRIORITY button
The pan/tilt head may be controlled by pressing this
button when multiple control panels are connected to this
unit.
This light will come one in control mode and will turn off in
non-control mode.
This button's light is always on when there are no control
panels connected to this unit.
a
b SPEED button
This is used to select the control (pan, tilt, zoom, focus,
iris) speed of the pan/tilt head system currently selected.
Each time it is pressed, the high-speed mode or low-
speed mode is selected in turn.
The button's lamp comes on in the high-speed mode, and
it remains off in the low-speed mode.
Using the SPEED SELECT item on the setting menu, the
speed can be set in one of three steps for the high-speed
mode and for the low-speed mode.
11
_
`
b