Panasonic AW-RP655N Operating Instructions Manual page 14

Parts and their functions
l TO PAN/TILT HEAD 2 to 5 terminal
• Functions as the pan/tilt head's connection terminal
when EXT CONTROL OUT is set to OFF on the
controller setting menu (see page 36).
Connect a 10BASE-T straight cable (UTP category 5) to
the pan/tilt head's IP/RP terminal.
May be extended up to a maximum of 1000 m.
Use the RS-232C/RS-422 converter and connect to
pan/tilt head's RS-232C control terminal when
connecting to the AW-PH300, AW-PH300A, AW-PH500
or AW-PH600.
• Cannot be used when the EXT CONTROL OUT is set
to ON on the controller setting menu (see page 36).
m MONITOR SELECT terminal
Connect a 10BASE-T straight cable (UTP category 5) to
the AW-RC400 cable compensation unit's MONI SEL IN
terminal. May be extended up to a maximum of 50 m.
The video signal from the pan/tilt head system connected
to the input terminal, whose number is selected on this
unit, will be sent from the AW-RC400's MONITOR 1, 2
terminals.
m l
14