Rapidly Moving To A Specific Location - Roland Aproll MDX-540S User Manual

5-2 Moving the Tool

Rapidly Moving to a Specific Location

You can move rapidly to the VIEW position or origin. For the Z axis, movement is always to the highest location; movement
to the specified location is performed only for the X and Y axes. This operation cannot be performed when the spindle cover
is open, during cutting operations, or while paused.
For related items, P. 48 "3-4 Moving the Tool"
Procedure



80
Chapter 5 Handy Panel
In the RML-1 mode
<MOVE MEN U>
> VIEW
USER-XY
MACHINE-XY
[Return to main]
In the NC-code mode
<MOVE MEN U>
> VIEW G57-XY
G54-XY G58-XY
G55-XY G59-XY
G56-XY EXOFS-XY
MACHINE-XY
[Return to main]
<MOVE M ENU>
VIEW
> USER-XY
MACHINE-XY
[Return to main]
Close the spindle cover.
Press the [MENU] key several times
to display [MOVE MENU].
Use the hand wheel to select the
movement destination.