4-5 Using the Tool Sensor
Setting the Z-axis Origin Using the Tool Sensor
This feature is convenient when you want to set the Z-axis origin at the top surface of the workpiece.
Procedure
74
Chapter 4 Getting Ready for and Performing Cutting
Tool sensor
Approx. 5 mm (0.2 in.)
Connect the tool sensor.
If the ATC is installed, then grasp
the desired tool.
Place the tool sensor on the top
surface of the workpiece where you
want to set the Z-axis origin.
Move the tool to the area above
the tool sensor.
Close the spindle cover.