Pausing And Quitting Cutting; Pausing And Resuming Operation - Roland Aproll MDX-540S User Manual

5-4 Pausing and Quitting Cutting

Pausing and Resuming Operation

This operation pauses cutting operation. Resuming from the location where paused is possible.
For related items, P. 54 "3-6 Pausing and Quitting Cutting"
USER(RML1)
> X 0.000
Y 0.000
Z 0.000
RATE x500
The operations you can perform while the machine is paused are as follows.
 Hand-wheel feed
 Starting or stopping the spindle
 Setting overrides
 Quitting cutting
84
Chapter 5 Handy Panel
*READY
S 0
[ ]
100%-XYZ
100%-S
Pressing this once pauses operation. Pressing and holding this
down resumes operation.