Vpanel - Roland Aproll MDX-540S User Manual

VPanel

Operation of the machine is controlled from the screen of your computer. VPanel is a dedicated program for controlling the
machine.
This displays the installation
status of optional equipment
and the like.
This displays the cutting time.
It is reset when the next cut-
ting operation starts.
Note: The information displayed may vary depending on what optional devices are installed.
This displays the present tool
location.
This displays the present
rotating speed of the spindle.
Changing the speed is also
possible.
This displays the present
feed rate.
This displays the present
spindle load.
1-2 Part Names and Functions
Menu icons
You choose which item you
want to control by clicking
one of these icons.
This displays the status of
the machine. When an error
occurs, a description of the
error is displayed.
Chapter 1 Introduction
27