Cutting Area; Workpiece Size And Location Where Secured In Place - Roland Aproll MDX-540S User Manual

4-1 Cutting Area

Workpiece Size and Location Where Secured in Place

Arrange the workpiece (the material cut), frames, and the like so that they fit within the determined range. Anything extend-
ing beyond may strike moving parts. Be sure to observe this requirement, as failure to do so may result in damage to the
workpiece or frame or malfunction of the machine.
WARNING: Failure to comply may lead to danger of injury by a broken tool thrown out with
force.
Standard Table
Maximum workpiece range
(Unit: mm)
25
T-slot Table (Optional)
Maximum workpiece range
(Unit: mm)
25
58
Chapter 4 Getting Ready for and Performing Cutting
Maximum workpiece range
(X-axis travel)
500
550
Maximum workpiece range
(X-axis travel)
500
550
Amount of tool extension
254 mm (10 in.)
- amount of tool extension
Amount of tool extension
239 mm (9.4 in.)
- amount of tool extension