6-1 Daily Care
Cleaning the Z Axis
Care and Maintenance of the Collet and Spindle Nose
96
Chapter 6 Maintenance
Protect this area from rust.
Clean the interior.
Pull back the cover and clean away
any buildup of cuttings in the inte-
rior.
Before use, clean away any cutting waste and
excess grease. Failure to do so may affect
runout precision or cause slippage.
Perform maintenance diligently to prevent
rust. Thoroughly wipe off any skin oils or the
like with a cleaning rag. When the machine
is to be taken out of use for some time, apply
machine oil to prevent rust.