Name/Function Of Each Part; Display Explanations - HoMedics HEALTH PLUS BPS-FD1 Manual

BPS-FD1.qxd 7/13/06 9:55 AM

NAME/FUNCTION OF EACH PART

Air Tube and
Connector
Inflation Bulb
Page 7
Arm Cuff
LCD Display
Battery Cover
(Located on
back of unit)
START/STOP Button
7

DISPLAY EXPLANATIONS

Pulse Symbol
Weak Battery
Symbol
If any of the following letters and numbers appear in the area that diastolic
pressure should be displayed, an error has occurred with your reading.
See Troubleshooting section of this manual for more information.
Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Air Circuit Abnormality: Check cuff connection. Measure
again.
Pressure Exceeding 300 mmHg: Switch the unit off to
clear, then measure again.
Data Error: Remove and reload the batteries.
8
Systolic
Pressure
Diastolic
Pressure
Pulse Rate