Important Notes Regarding Your Blood Pressure Measurement - HoMedics HEALTH PLUS BPS-FD1 Manual

BPS-FD1.qxd 7/13/06 9:55 AM
4. When the measurement is completed, the cuff
will deflate entirely. Systolic pressure, diastolic
pressure and pulse will be shown simultaneously
on the LCD screen.
Note: 1. This monitor automatically turns off approximately 1 minute after
last operation. You may also press the START/STOP button to turn
the unit off.
2. To interrupt the measurement, you may press the START/STOP
button. The cuff will deflate immediately after a button is pressed.
Page 17
17
IMPORTANT NOTES REGARDING YOUR BLOOD
PRESSURE MEASUREMENT
• Take your reading in a comfortable environment
as measurements can be affected by hot or cold
temperatures. Take your blood pressure at normal
body temperature.
• Do not move or talk during measurement as this
can elevate readings.
• Do not move or cross legs during measurement.
Keep feet flat on floor.
• Do not touch cuff or monitor during measurement
procedure.
• It is suggested that you take your measurements at
the same time each day and use the same arm for
consistency.
• Users should wait a minimum of 5 minutes before
taking additional measurements. More time may be
necessary depending upon your physiology.
• The measurement results that users receive
are for reference only. If users have any blood
pressure concerns, please consult a physician.
• If inflation reaches 300 mmHg, the unit will
deflate automatically for safety reasons.
• This product is not suitable for people with
arrhythmias.
18