Jacuzzi J-400 Series Installation Manual And Use & Maintenance page 66

ProClarity
60 days left
add
60
days
From the"Water Care"Menu you can to set the"ProClarity"timer.
Tap or to change the days in 10-day increments. The
range is from 0 to 180 days.
If the electrical power supply is disconnected, the countdown is saved
in the memory.
Note: to ensure the appliance works correctly, do not
deactivate this function; program it as specified.
Tap to confirm and save your changes.
When the timer expires, a message will appear on the control
panel display. The filters must be cleaned or replaced. Follow
the instructions above to reset the timer. If you tap "snooze" the
message will clear but the error icon (
reminder screen will reappear in 10 days. Refer to section "Clea-
ning the Filter Cartridges" for cleaning instructions.
Tap to return to the "Water Care" Menu. Tap again to return
to the Settings Menu.
Programming the ProClarity Depth Filter Timer
A programmable filter timer can be set to remind you when to
replace the ProClarity Depth Filter.
Tap to enter the Programming Menu.
ProClarity Depth 50
ProClarity Depth
40 days left
add
50
days
From the "Water Care" Menu you can to set the "ProClarity
Depth" timer.
Tap or to change the days in 10-day increments. The
range is from 0 to 90 days.
If the electrical power supply is disconnected, the countdown is sa-
ved in the memory.
Note: to ensure the appliance works correctly, do not
deactivate this function; program it as specified.
Tap to confirm and save your changes.
When the timer expires, a message will appear on the control
panel display. Follow the previous instructions to reset the ti-
mer. The filter must be replaced. Refer to section "Cleaning the
Filter Cartridges" for filter location. If you tap "snooze" the mes-
sage will clear but the error icon (
minder screen will reappear in 10 days.
Reminder
It's time to clean or replace
your ProClarity and Pro-
Clear filters. Contact your
authorized dealer if new
filters are needed.
reset snooze
will display and the
)
Reminder
It's time to replace your
ProClarity Depth filter.
Contact your authorized
dealer for a new filter.
reset snooze
will display and the re-
)
Tap to return to the "Water Care" Menu. Tap again to re-
turn to the Settings Menu.
Optional Wi-Fi Setup
From the Settings Menu, tap
Menu tab in Orange. Tap
gramming options. Make sure you have downloaded the Wi-Fi
App for this setup.
SETTINGS
Water Care
Wi-Fi
Lock
You need to follow the instructions from the App in order to
connect the Wi-Fi.
While the system attempts to connect you will see the, "Spa Wi-
Fi Setup in-progress". When the connection is done the display
will read, "Spa Wi-Fi Setup Successfully Connected".
WiFi Connect
Spa Wi-Fi Setup
Successfully Connected
Reset?
If the Wi-Fi connection setting should need to be updated or
connected to new router, follow the steps below.
From the "Settings" menu, tap
menu.
Tap . The display will change to "Spa Wi-Fi Setup In-
Reset?
progress" and the reset button will be highlighted in Orange.
Tap again. This will clear the current data and allow
Reset?
the spa to connect to the need data. Reconfigure and setup
your spa by following the instructions from the app.
Locking the Spa
From the "Settings" menu, tap
menu tab in Orange.
Tap
Lock
can prevent users from changing certain features of the spa.
When a lock feature is active, the lock icon (
the Main Menu. When you enter the "Lock" menu, if one of the
three settings is locked, it will be highlighted orange.
SETTINGS
>
Lock
>
Time & Date
>
Language
66
or to highlight the "Wi-Fi".
to enter the pro-
Wi-Fi
Wi-Fi Connect
Spa Wi-Fi Setup
In-progress
Reset?
Wi-Fi
or to highlight the "Lock"
to enter the programming options. You
will appear on
)
Time & Date
Time Date
6:45p 01/01/2015
8 00
pm
24 Set
to enter the