Table of Contents
Advertisement
COMPUTER INSTRUCTIONS
OPERATION DESCRIPTIONS
1.
To stop a running program, press the START / PAUSE button. In this mode, you can press the
START / PAUSE button again to continue to run the current program. Or, you can use " / " buttons to
select a new program.
2.
When you complete a program, the computer will remind you with an audible alarm. You can press any
button to stop the audible alarm.
3.
If you want to restart with a new program, press and hold the START / PAUSE button down for two
seconds to reset all of the function values to zero. Use " / " buttons to select a new program.
4.
The computer will shut off automatically after 4 minutes of inactivity and all function values will be reset
to zero.
POWER SOURCE:
The computer uses the adapter as a power source. Use the
adapter plugged into an electrical outlet.
STORAGE
ELITE ELLIPTICAL / STEPPER
1.
To store the
2.
The min. rest dimesions of
wide x 63" tall. These dimensions may vary. Please measure your
exact dimensions are needed.
ELITE ELLIPTICAL / STEPPER
3.
Move the
HANDLEBARS(7, 8),
Grasp the
MAINTENANCE
The safety and integrity designed into the
ELITE ELLIPTICAL / STEPPER
the
be given to the following:
1.
Use the " / " buttons on the
System provides different tensions. The Magnetic System should provide many years of use.
2.
Clean the roller tracks in the
3.
Verify that the Warning Label is in place and easy to read. Call Stamina Products immediately
(1-800-375-7520) for a replacement Warning Label if the Warning Label is missing or damaged.
4.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5.
Verify that all nuts, bolts, and knobs are present and properly tightened. Replace missing nuts, bolts,
and knobs. Tighten loose nuts, bolts, and knobs.
6.
Worn or damaged components shall be replaced immediately or the
removed from service until repair is made.
7.
Only Stamina Products supplied components shall be used to maintain/repair the
/ STEPPER.
ELITE ELLIPTICAL / STEPPER
8.
Keep your
ELITE ELLIPTICAL / STEPPER
with the moving wheels on the
ELITE ELLIPTICAL / STEPPER
tip the
ELITE ELLIPTICAL / STEPPER
is regularly examined for damage and wear. Special attention should
COMPUTER(32)
PEDAL RAILS(42)
clean by wiping with an absorbent cloth after use.
ELITE ELLIPTICAL / STEPPER
simply keep it in a clean dry place.
are approximately 50 1/4" long x 28 3/4"
ELITE ELLIPTICAL / STEPPER
to select a program and verify that the Magnetic
with an absorbent cloth.
ELITE ELLIPTICAL / STEPPER
21
FRONT STABILIZER(3).
forward and move slowly.
can only be maintained when
ELITE ELLIPTICAL
with the
if
Hide quick links:
Advertisement
Table of Contents
