Advertisement
Installing the Cisco NCS 4216
Figure 68: 3G Patch Panel Without Brackets - Dual
Patch Panel Pinout
Given below are the pinout information for the regular crossover and the straight-through cable patch panel.
Table 4: Pinout Details
Pin
#
1
2
3
4
5
6
7
8
Patch Panel Cabling for Redundancy
You can connect the patch panels with the interface modules for redundancy, using the Y-cables. The Y-cable
stub lengths are reduced, so that the cable does not exceed from the rack spacer. The Y-cables are numbered
based on the different stub length. Cable lengths differ for even numbered and odd numbered slots in the
chassis.
Crossover
Straight-through
Receive Tip
Transmit Tip
Receive Ring
Transmit Ring
—
—
Transmit Tip
Receive Tip
Transmit
Receive Ring
Ring
—
—
—
—
—
—
Patch Panel Pinout
Installing the Cisco NCS 4216
89
Advertisement
