Advertisement
Installing the Cisco NCS 4216
Figure 28: Connecting a Modem to the Cisco NCS 4216
1
RJ45 AUX port
2
DB-9 to DB-25 adapter
Step 2
Connect the DB-9 end of the console cable to the DB-9 end of the modem adapter.
Step 3
Connect the DB-25 end of the modem adapter to the modem.
Step 4
Make sure that your modem and the router auxiliary port are configured for the same transmission speed (up
to 115200 bps is supported) and for mode control with data carrier detect (DCD) and data terminal ready
(DTR) operations.
3
RJ45 to DB-9
4
Modem
Connecting to the Auxiliary Port
Installing the Cisco NCS 4216
49
Advertisement
