Cisco NCS 4216 Installing page 15

Hide thumbs Also See for NCS 4216:

Installing the Cisco NCS 4216

Figure 14: Installing the Cisco NCS 4216 Door

To install the door of NCS 4216 shelf, follow the steps below:

Procedure

Step 1

Align the left door bracket screw holes against the shelf screw holes.

Step 2

Insert the fasteners provided along with the packaging (three screws on the side and two screws on the bottom

of the door bracket) and tighten them to a torque value of 11.5 in-lb (1.3 N-m).

Step 3

Place a safety washer on the front bottom of the door bracket and fasten it with a fastener.

Step 4

Repeat steps 1 and 2 for the door bracket on the opposite side.

Installing the Cisco NCS 4216 Door

Installing the Cisco NCS 4216