Advertisement
Installing Plenum Assembly and Chassis in the Rack
Figure 6: Securing the Air Baffle Tray
1
Step 6
Repeat Step-3 to Step-5 to complete the plenum assembly on the other side of the plenum base.
Step 7
Position the front cover hinge assembly on the plenum deflector. Secure the front cover using a recommended
torque of 11.5 in.-lb (1.3 N-m). See figure below.
Figure 7: Front Cover Hinge Assembly on the Plenum
1
Installing the Cisco NCS 4216
6
Securing air baffle to air plenum
Front cover hinge assembly
Installing the Cisco NCS 4216
-
-
Advertisement
