Applying Reference Identification Labels - Siemens SIMATIC ET 200SP HA System Manual

6.1.5

Applying reference identification labels

Procedure
Proceed as follows to apply a reference identification label:
1. Break off the reference identification labels from the sheet.
2. Insert the reference identification labels into the insert opening on the top of the modules:
– Interface module
– BusAdapter
– I/O module
– Slot cover
Figure 6-3
ET 200SP HA Distributed I/O system
System Manual, 08/2019, A5E39261167-AD
①
Reference identification labels
②
Opening for label
Applying reference identification labels
6.1 Markings of IO device components
Wiring
79