Preface - Siemens SIMATIC ET 200SP HA System Manual

Preface

Purpose of the documentation
This documentation provides comprehensive information on using the ET 200SP HA
distributed I/O system in the automation system:
● General information on the ET 200SP HA distributed I/O system
● Configuring
● Installation
● Wiring
● Commissioning
Basic knowledge required
A basic knowledge of automation technology is required to understand the documentation.
Validity of the documentation
This documentation applies to the ET 200SP HA distributed I/O system.
The PROFINET IO system based on the ET 200SP HA distributed I/O system can be used in
the following combination:
Process control system
SIMATIC PCS 7
Configuration of the ET 200SP HA
You can configure the following components of the ET 200SP HA when the following updates
are installed:
Component of the ET 200SP HA
Shared device for IM155-6 PN
AI (potential distributor terminal block)
AQ (potential distributor terminal block)
DI 32x24VDC HA
DQ 32x24VDC/0.5A HA
BusAdapter (types: LC/FC; LC/RJ45)
ET 200SP HA Distributed I/O system
System Manual, 08/2019, A5E39261167-AD
As of version
V9.0
CPU in the automation system
SIMATIC CPU 410-5H
Required updates
HSP0272 V1.01.00
HSP0273
HSP0274
HSP0275 V2.00.00
HSP0276 V2.00.00
HSP0278
2
9