Set Film Type - AGFA PCR II Plus User Manual

Set Film Type

The SET FILM TYPE function enables you to specify which type of film
you are using.
To use this function, follow these steps:
Step 1: Attach the camera module to the film recorder.
Step 2: Press MENU once, then NEXT or PREVIOUS until the display
reads SET FILM TYPE SELECT FUNCTION.
Step 3: Press SELECT. The message window displays the currently
selected film type.
Step 4: Press NEXT or PREVIOUS to scroll through a list of the other
supported film types. For example, if you are using the
35mm module, your choices are:
Step 5: When the message window displays the film type you are
using, press SELECT. The film recorder does the following:
• Loads the default look-up table for the specified film type.
• Loads the brightness, contrast and repeat values last set
at the front panel controls for the specified film type.
• Calibrates the CRT brightness levels.
Step 6: Press MENU to return to the READY message.
4-6 • PCR II Plus User Guide
EKTA ASA 100 PRO
AGFA RS100 PLUS
AGFA OPTIMA 125
VERICOLOR 3S
USER FILM 1
USER FILM 2