AKG CM12/8 Manual page 29

Store Matrix Setup to EEPROM
Host sends command - 10
Host sends 61 data bytes:
Output Current Active Memory Number
Host sends command - 11
Host receives data byte: Current active memory, 1-9.
- Allows the host to download a memory setup directly to EEPROM.
Byte 1: EEPROM memory number, 1-9
Bytes 2-61: Matrix setup data bytes, formatted as in Output Complete Memory
Setup (7) above. Note that after each data byte is sent by the host, the MM8
will send a byte of 100 as an acknowledgement of a successful write
to EEPROM.
- Outputs the current active memory number.
29
CM12/8