Invacare TDX SP2 Series Service Manual page 20

Invacare® TDX® SP2 Series
Component
Drive units, clutch
mechanism
Brakes
Legrests
Power legrests (if
fitted)
Lighting (if fitted)
Battery mounting
Batteries
Remote / power
module
20
Check Remedy
Motors Test motors
Check functions in Check carbon brushes,
drive and push modes replace if necessary
(not with lifetime
Check clutch
brushes)
mechanism
Replace motor if
necessary
Tighten screws/nuts,
adjust or replace if
necessary
Check motor brake Test motor brake
Check welded seams, Tighten, replace if
interlocking, screws, necessary
foot plates
Check cable Replace cable if
necessary
Check contacts
Check functions
Check cable Replace lamp or cable
if necessary
Check function
Check battery support Replace if necessary
and mounting belts
for damage
Check batteries for Replace batteries if
damage necessary
Check battery voltage Charge batteries
Check contacts and Clean contacts and
terminals terminals
Remote, status LED
Evaluate error/flash
flashing
code
Fixings
Tighten fixings,
replace if necessary
Cables and connecting Replace damaged
plugs cables and tighten
connecting plugs, if
necessary
Joystick function Replace joystick knob
if necessary
Replace remote if
necessary
Power supply Replace damaged
cables and tighten
connecting plugs, if
necessary
Notes
See 5.1 Testing Motor, page 11.
See 6.7 Drive Components, page
29.
See 5.1 Testing Motor, page 11.
See 6.12 Lighting unit, page 49.
See 6.11.4 Replacing Batteries
(60 Ah / 73 Ah), page 47, 6.11.6
Replacing Batteries / Battery
Cables, page 48 and 6.11.2
Handling Damaged Batteries
Correctly, page 46.
See user manual.
See safety information in 6.11.4
Replacing Batteries (60 Ah /
73 Ah), page 47, 6.11.6 Replacing
Batteries / Battery Cables, page
48 and 6.11.2 Handling Damaged
Batteries Correctly, page 46.
See 6.3 Troubleshooting, page 14.
1532486-N